Sunday, March 17, 2013

CobraCrane 5033 BackPacker Single Bar Portable Jib Arm, Crane Length 5 feet

CobraCrane 5033 BackPacker Single Bar Portable Jib Arm, Crane Length 5 feet

Shock Sale CobraCrane 5033 BackPacker Single Bar Portable Jib Arm, Crane Length 5 feet very cheapYou looking to find the "CobraCrane 5033 BackPacker Single Bar Portable Jib Arm, Crane Length 5 feet" Good news! You can purchase CobraCrane 5033 BackPacker Single Bar Portable Jib Arm, Crane Length 5 feet with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

CobraCrane 5033 BackPacker Single Bar Portable Jib Arm, Crane Length 5 feet On Sale

Price: $350.00 $339.00   Updated Price for CobraCrane 5033 BackPacker Single Bar Portable Jib Arm, Crane Length 5 feet now
Purchase CobraCrane 5033 BackPacker Single Bar Portable Jib Arm, Crane Length 5 feet low price

Product Feature

  • Quick Setup: CobraCranes set up in minutes - no additional tools required
  • Ease of Use: With only minutes of practice, get those hard to get shots
  • Flexible: Works with a wide variety of cameras and tripods
  • Proper tool for the job: Optional Extension kit, offers two lengths for a variety of shot requirements
  • Affordable: Most dramatic difference for the least amount of money

Product Description

The CobraCrane 5033 BackPacker Single Bar Portable Jib Arm is for cameras less than 6.5 lbs. It breaks down to only 42" for easy transport. The Backpacker can breakdown as small as 42 inches, which makes it easy to carry in a backpack or transport in a car or airplane or even a motorcycle. The Backpacker can handle cameras up to about 5 lbs, making it ideal for use with any of the single chip camcorders, small three chip camcorders such as the Canon HV20, GL1 and GL2, PD 150s, V1U, A1U, JVC small cameras and light cameras from Sony, JVC, Panasonic, Canon and other. The CobraCrane BackPacker is a easy to setup device that is simple to operate, by one individual, while taking amazing footage. The CobraCrane BackPacker mounts on any sturdy tripod with the CobraCrane Mounting Bracket for quick and easy set up and can shorten to 42 inch for portability. This sturdy construction elevates your camcorder up to 8 feet and can hold a camcorder up to 6.5 pounds. The CobraCrane BackPacker is made from super durable, high strength, lightweight steel. While total height depends on tripod, the CobraCrane BackPacker gains 3 ft. above the Tripod Head. Backpackers are used by adventure camera operators. If your job requires climbing up the mountains, hiking on the trail, shooting on the ski slopes, or use in the wild, CobraCrane Backpacker is the system for you. Made of durable aluminum rails, the Backpacker gives you incredible freedom of movement.

CobraCrane 5033 BackPacker Single Bar Portable Jib Arm, Crane Length 5 feet Review

Length:: 0:47 Mins

These are shots I took using the cobracrane backpacker.

I bought this jib arm crane because I was impressed with the videos of some other folks who took this crane to the mountains, literally backpacking with it. It is a functional crane for shooting vertical moving masters, and basic pan-and-tilt masters where the jib is on a straight axis pointing at the subject. With tilt control at the tripod, you can hold your subject in the frame as you crane up or down, or let the tripod handle go and the camera will stay level throughout the crane movement. Fits most a1-sized cameras or DSLRs. Setup is easy with practice.

PROS:
it's light, has only one arm, you can control the tilt as well as the height from the tripod position, or it can just stay level as you crane up and down, fits indoors and gives the maximum reach of a normal ceiling.

CONS:
it is cable controlled, which means that you have to adjust or tighten the cable according to the mission, and it has a tendency to tilt to the left, away from the jib arm.

I found that you can eliminate the tilt by tightening the bolts, but since they are the same bolts that adjust the sprocket torque, you have to adjust it carefully.

TIPS FOR BEGINNERS: (1) like all jib arms, you do need a counterweights. And (2) a jib arm is NOT FOR LIGHT DUTY TRIPODS. In fact, one thing that was not in the advertising is that this jib includes a fitting for a MANFROTTO 501PL TRIPOD PLATE, for the manfrotto 501 and 701 tripod heads. You can use other tripods, though.

Most of the consumer Reviews tell that the "CobraCrane 5033 BackPacker Single Bar Portable Jib Arm, Crane Length 5 feet" are high quality item. You can read each testimony from consumers to find out cons and pros from CobraCrane 5033 BackPacker Single Bar Portable Jib Arm, Crane Length 5 feet ...

Buy CobraCrane 5033 BackPacker Single Bar Portable Jib Arm, Crane Length 5 feet Cheap

No comments:

Post a Comment